Base Excavators
- JCB 3CX
- JCB 4CX
- BOBCAT Skid steer
- Komatsu PC60 mini excavator
- JCB Mini excavator
- Hitachi Mini Excavator
- CATERPILLAR mini excavator
- Volvo Loader backhoe
- CASE loader backhoe
- Wacker Neuson Mini Excavator
FINE6BL
Quick Enquiry- Description
- Basic Informations
- External Dimensions
- Installations Specifications
- Available Tools (CHISELS)
Standard Accessories
- Mounting Frame (Adaptation plate)
- Breaker Tool
- Tool Box
- Pressure Gauge set for N2 Charging Kit
- 2 nos hose pipes
- Cylinder N2 Gas
- Manual book
Basic Informations
Bracket Version Backho Loader
Available Option
- 2-speed control: Std.
- Dust protector: Opt.
- Auto-greasing kit: Opt.
Working Weight 1): 400 kg / 882 lbs
Weight without chisel and mounting adapter: kg (lbs)
Overall Length 2): 1,535 mm / 60 in
Weight of components
- Power-cell: kg (lbs)
- Chisel(standard): 18 kg / 40 lbs
- Mounting adapter 3): kg(lbs)
Required Oil Flow: 30 ~ 50(8 ~ 13) lpm(gpm)
Operating Pressure: 90 ~ 130(1,305 ~ 1,885) bar(psi)
Blow Frequency: 400 ~ 1,500 bpm
Impact Energy: 849(627) J(ft.lbf)
Tool (chisel) Shank Diameter: 72 mm / 2.8 in
Notes
- Total weight including standard tool, standard mounting adapter and spacers but excluding hydraulic hoses, fittings and mounting pins.
- The length measured from the tool tip of the standard tool to the top of the breaker including mounting adapter.
- Including standard mounting adapter, fasteners and spacers (for Backho Loader).
External Dimensions
Backho Loader Unit: mm
Standard Mounting Adapter for Backho Loader
Installations Specifications
Gas Charging Pressure 1)
Back-head (Piston accumulator) 2): 16 ~ 17 (232 ~ 247) bar (psi)
Hydraulic Piping
- Line size (min. internal diameter): 13 mm / 1/2 in
- Acceptable back pressure (max.) 3): 10(150) bar(psi)
Hose connections of breaker
Oil supply (IN) & return (OUT): BSP 1/2″ O-Ring Boss Female
Pressure Relief (min.): 40 (600) + measured max. operating pressure.
Acceptable Hydraulic Oil
Operating temperature 4): -20 ~ +85 (-4 ~ +185) °C(°F)
Viscosity: 1000 ~ 10 cst
Notes
- The prefill nitrogen gas pressure measured statically (breaker not operating) without down load on the tool at the stabilized gas temperature of +20 °C.
- The recommended value at the normal operating condition (supplied oil flow, oil temperature and viscosity, etc.).
- The maximum allowed oil pressure at the breaker’s connection point to the return line (measured statically without the breaker).
- The allowed temperature limits when using the oil of viscosity grade 46.
Available Tools (CHISELS)
Notes
- The diameter of the tool portion outside the breaker body.
- Other special designs are also available on request.
